Window Replacement in Normandy Park

When new windows make sense

Some window problems are small. A worn balance, a torn screen or a failed lock can often be fixed, and our window repair service exists for exactly that. Replacement is the better answer when the glass seal has failed on several units, the frames are rotting or bending, or the windows simply can't keep the heat in anymore.

Plenty of homes around here still have original aluminum frames with single-pane glass. In our damp winters those frames sweat, water collects on the sills, and the paint and drywall underneath start to suffer. New vinyl or fiberglass windows with insulated, low-E glass stay warmer on the inside surface, so you see far less condensation and feel fewer drafts.

From the first phone call to the final walkthrough, you deal with one person. That person measures, writes your estimate, orders your windows and is on site the day they go in.

What your window replacement includes

Careful measuring

We measure every opening ourselves and check that it is square. Windows are custom-made, so accurate numbers here prevent gaps, shims stacked too high and a second visit.

Insert or full-frame, explained

An insert window fits inside your existing frame and keeps your interior trim in place. Full-frame replacement removes everything down to the rough opening, which is the right choice when the old frame is rotted. We show you which fits each window and why.

Glass and frame choices

We walk you through vinyl and fiberglass frames, double or triple panes, low-E coatings and argon fill. You get a plain explanation of what each option changes, not a push toward the most expensive one.

Weathertight installation

Each window is set level, flashed so water drains out instead of in, insulated with low-expansion foam and sealed. This is the part that decides whether a new window stays dry for decades.

Cleanup and haul-away

We cover floors and furniture near each opening, remove the old windows and debris, and vacuum before we leave.

Proper coverage on your property

We are a licensed company, and we are insured and bonded. That means the crew setting windows in your home is covered from the first cut to the last bead of sealant.

Signs your windows are ready for replacement

• Fog between the panes

  A milky haze trapped inside the glass means the edge seal has failed and the insulating gas has escaped. Cleaning either side of the window will never clear it.

• Wet sills every winter morning

  Condensation that runs down the glass and puddles on the sill points to cold frames or single-pane glass. Left alone, it stains wood, swells trim and gives mold a place to grow.

• Soft or crumbling frames

  Test the lower corners of a wooden frame with the tip of a key. When the wood gives way or flakes off, rot has taken hold and the frame can no longer keep the window square.

• Sashes that stick or won't lock

  Windows you have to wrestle open or that refuse to latch hurt both comfort and security. When several of them act up, replacement often costs less than chasing one repair after another.

• Drafts and rising heating bills

  If you feel moving air beside a closed window, or a candle flame bends toward the glass, warm air is escaping your home right there.

How your project runs

1. 1

   A no-pressure phone call

   You tell us what is bothering you about your windows. We ask a few questions and set a time to come out. There is no charge and no obligation.

2. 2

   In-home visit and written estimate

   Your project contact looks at each window, takes measurements and goes over options with you. You get a written estimate that lists each window and the install method, so nothing is hidden in a lump sum.

3. 3

   Ordering and scheduling

   Once you approve, we order your windows to the measured sizes. When they arrive and pass our inspection, we call to schedule the install on a day that works for you.

4. 4

   Install day

   The crew protects your floors, removes the old units one at a time and sets each new window before moving to the next, so your home is never left open. Most installs are finished in a single day.

5. 5

   Walkthrough

   We open, close and lock every window with you, show you how the tilt features work, and leave the place clean.

What moves the price of your new windows

We price each project after we have stood in front of your windows, because no two houses are alike. The written estimate you receive lists each window on its own line with its install method. If paying over time would help, we offer flexible payment options.

Number and size of windows

More openings and bigger glass mean more material and more labor. Doing several windows in one visit usually brings the cost per window down.

Frame material and glass package

Fiberglass runs higher than vinyl. Triple panes and specialty coatings raise the price too, and we will tell you plainly whether they are worth it for your home.

Insert versus full-frame

Full-frame replacement takes longer and involves more trim work. If we uncover rot behind an old frame, we take photos, explain the repair and get your okay before doing anything extra.

Access and special shapes

Upstairs windows that need tall ladders, large picture windows, bays and arched tops all take more handling and custom fabrication.